6
www.fosterrefrigerator.com
Installation
2
Removal of packaging
Prior to carrying out this operation please ensure that these instructions have been read, understood and that
the necessary personnel and tools are available to ensure that these instructions are complied with. It is also
recommended that a full assessment of the installation conditions and requirements be conducted prior to
commencing this operation.
Tools required: A sharp retractable knife or scissors
Pliers or cutters suitable to cut hard plastic
Single door appliances weigh up to 150kg when empty and requires at least 2 people to carry out
these instructions.
Double door appliances weight up to 230kg when empty and requires at least 4 people to carry out
these instructions.
Never lift more weight than you are comfortable with. Any lifting should be carried out using correct
lifting techniques.
Never stand directly in line or under the appliance when it is leaning at an angle while carrying out
these instructions.
The appliances are top heavy and care should be taken when manoeuvring uneven or sloping
surfaces. Do not manoeuvre the appliance without assistance.
It is recommended that gloves are worn when carrying out these instructions.
Single Door Cabinet Double Door Cabinet
1 Remove outer plastic and cardboard. Take care
not to damage the appliance with any sharp
objects used to remove the packaging.
2 Position the pallet against a at surface of a
similar height to the pallet.
1 Remove outer plastic and cardboard. Take care
not to damage the appliance with any sharp
objects used to remove the packaging.
2 Position the pallet against a at surface of a
similar height to the pallet.
Position appliance pallet
against a level surface of
similar height
Position appliance pallet
against a level surface of
similar height
To Next Page
Loading...
