To Next PageTo Next Page
Need help?Do you have a question about the Fostex VF08 and is the answer not in the manual?
General| Type | Digital Multitrack Recorder |
|---|---|
| Tracks | 8 |
| Simultaneous Playback Tracks | 8 |
| Sampling Frequency | 44.1 kHz |
| Bit Depth | 16-bit |
| Effects | Reverb, Delay, Chorus |
| Connectivity | USB |
| Power Supply | AC adapter |
Covers essential safety guidelines for operating the appliance and preventing hazards.
An overview of the VF08's capabilities including editing, pitch control, and connectivity.
Details on the DSP multi-effect processor and fader controls.
Information on the digital multitracker's recording format and capacity.
Additional features like LCD display, hard disk, and MIDI connectivity.
Explanation of using tracks 9-24 for data management and exchange.
Understanding audio and silent parts as distinct recorded events.
Modes for monitoring input signals versus playback signals.
Adjusting analog input signal levels for optimal A/D conversion.
Understanding different time base modes for location display.
Overview of controls and connectors on the top surface of the VF08.
Description of connectors and switches on the rear panel.
Details of connectors on the side panel.
Specifics of analog input and output connectors and controls.
Details of mixer controls, faders, and parameter buttons.
Details of recorder controls, display, and function buttons.
Procedure for reformatting the internal hard disk drive.
Instructions and precautions for replacing the HDD.
Step-by-step guide for formatting the hard disk.
Guide for connecting microphones, instruments, and other devices.
Explanation of the VF08's Liquid Crystal Display.
Essential concepts for understanding recording and playback.
Mapping of input signals to available recording tracks.
Instructions for using phantom power with condenser mics.
Step-by-step guide for recording audio onto one track.
Step-by-step guide for recording stereo audio onto two tracks.
Adding marks at desired positions during playback or stop.
Navigating to previously set mark points.
Procedure for removing unwanted marks.
Quick navigation to program start, end, or last playback/record position.
Technique for replacing audio sections with new recordings.
Automating punch in/out recording using set points.
Setting track and master output volume levels.
Adjusting the stereo placement (panning) of each track.
Modifying the frequency response of tracks using EQ.
Applying and adjusting internal DSP effects.
Creating a stereo master mix via analog outputs.
Creating a stereo master mix via digital outputs.
Description of the VF08's startup screen and default state.
Basic mixer operations performed from the normal screen.
Overview of keys for accessing mixer parameter settings.
Detailed steps for setting track panning.
Detailed steps for adjusting track EQ settings.
Explanation of the reverb effect and its parameters.
Explanation of the delay effect and its parameters.
Explanation of the chorus effect and its parameters.
Explanation of the flanger effect and its parameters.
Adjusting the signal level sent to the effect processor.
Choosing an effect from the VF08's library.
Setting effect send routing as pre- or post-fader.
Enabling or disabling the internal effects processor.
Saving current mixer settings to scene memories.
Loading previously saved mixer settings from scene memories.
Matching physical fader positions to recalled scene settings.
Removing saved scene memories.
Linking scene memories to specific song positions via marks.
Removing marks from the scene sequence map.
Playing back scenes automatically based on mark map.
Monitoring audio at higher or lower speeds.
Monitoring audio at variable speeds using the jog shuttle.
Scrubbing audio track-by-track for precise editing.
Saving scrubbed positions as edit points.
Activating or deactivating the vari pitch control.
Adjusting playback or recording speed.
Modifying the pitch of the audio playback.
Removing center-panned audio elements.
Adjusting parameters for center-sound cancellation.
Enhancing low-frequency content.
Practicing instruments with recorded tracks.
Defining the boundaries for audio looping.
Setting loop points dynamically during operation.
Adjusting loop start/end points using the screen interface.
Using marks to define loop boundaries.
Activating and using the loop playback function.
Procedure for setting up a new song project.
Choosing an existing song project from the disk.
Removing unwanted song projects to free disk space.
Renaming or changing the title of a song project.
Duplicating sections of track data.
Relocating sections of track data.
Executing the copy, move, and paste operations.
Reversing or reapplying copy/paste track edits.
Removing sections of data from a track.
Reversing or reapplying erase operations.
Swapping data between different tracks.
Displaying all stored marks and their positions.
Adjusting the timing of existing marks.
Adding or editing text titles for marks.
Creating new mark points within a song.
Removing unwanted marks from the mark list.
Directly navigating to a specific mark position.
Using the internal metronome for timing practice.
Transferring audio to free up tracks for new recordings.
Practicing with adjustable playback speed and pitch.
Adjusting playback tempo for practice.
Modifying the pitch of playback audio.
Removing center-panned elements from audio.
Adjusting parameters for center-sound cancellation.
Enhancing low-frequency content.
Practicing instruments along with recorded tracks.
Applying effects for final sound processing.
Information on available mastering effects and presets.
Connecting and recording external digital devices.
Outputting the VF08's stereo mix to an external recorder.
Linking MIDI devices for synchronization.
Configuring VF08 settings for MIDI clock sync.
Verifying synchronization between VF08 and MIDI devices.
Recording audio while synchronized via MIDI clock.
Connecting external MIDI devices for synchronization.
Configuring external MIDI devices for synchronization.
VF08 configuration for external MIDI sync.
Verifying synchronization lock between devices.
Recording audio synchronized via external MIDI.
Overview of song data saving and loading methods.
List of data types compatible with save/load functions.
List of data types incompatible with save/load functions.
Compatibility requirements for digital audio recorders.
Considerations for saving data via S/PDIF.
Procedure for saving song data via S/PDIF.
Procedure for loading song data via S/PDIF.
Using a SCSI device for saving and loading song data.
Steps for saving song data to a SCSI disk.
Steps for loading song data from one SCSI disk.
Steps for loading song data from multiple SCSI disks.
Saving and loading audio data in WAV file format.
Procedure for saving audio data as WAV files.
Procedure for loading audio data from WAV files.
Configuring the VF08's operating environment and parameters.
Verifying track event numbers and current drive information.
Performing operations like save, load, and disk formatting.
Accessing the main setup menu.
Setting the time signature for songs.
Adding new time signature settings.
Managing tempo changes at specific points in a song.
Setting the tempo for a song.
Adding new tempo points to the tempo map.
Modifying existing tempo settings.
Removing tempo settings from the tempo map.
Enabling or disabling the internal metronome.
Configuring the type of MIDI sync signals output.
Setting the MTC frame rate for synchronization.
Specifying the MTC offset time value.
Choosing MTC offset mode (ABS or BAR).
Enabling VF08 to synchronize to external MIDI.
Selecting the type of external sync signal.
Preventing accidental data erasure by disabling record functions.
Configuring the digital audio input source.
Adjusting BAR/BEAT resolution for editing points.
Setting the VF08's MIDI device ID for MMC control.
Reviewing the count of audio and zero events per track.
Switching between the internal HDD and SCSI drive.
Checking details of the installed drive.
Configuring whether fader movements affect volume.
Setting fader behavior upon scene recall.
Details of MIDI functions and protocols supported by the VF08.
List of MIDI Machine Control commands.
List of messages for inquiring VF08 status.
Instructions for cleaning and general upkeep.
Detailed technical specifications of the VF08.
Physical dimensions, weight, and power requirements.
List of included accessories.
Diagram illustrating the internal architecture and signal flow.
Step-by-step guide for installing the optional SCSI card.
Details on electromagnetic compatibility and immunity specifications.
Contact information for European distributors.
