The rebound dial has approximately 22 clicks of adjustment.
For slower rebound, turn the red adjuster knob clockwise.
For faster rebound, turn the red adjuster knob counterclockwise.
ProPedal
Adjusting the ProPedal Dial
The ProPedal adjustment knob allows the rider to adjust the amount of ProPedal damping. ProPedal damping
affects the initial part of the compression stroke and is designed to control pedal-induced suspension bob. Since
suspension designs vary, not all bicycles require the same degree of ProPedal damping.
There are 15 clicks of adjustment:
For more ProPedal damping, rotate the ProPedal knob clockwise.
For lighter ProPedal damping, rotate the ProPedal knob (shown below) counterclockwise.
Adjusting the ProPedal Switch
The ProPedal adjustment switch allows the rider to adjust the amount of ProPedal damping using a 2-position
switch, which varies from FIRM to SOFT. ProPedal damping affects the initial part of the compression stroke and
is designed to control pedal-induced suspension bob.
The switch has two (2) positions:
For more ProPedal damping, rotate the ProPedal switch clockwise.
For lighter ProPedal damping, rotate the ProPedal switch (shown below) counterclockwise.
To Next Page
Loading...
