Do you have a question about the Fox ELITE 2.5 Series and is the answer not in the manual?
| Type | Fork | 
|---|---|
| Damper | FIT4 | 
| Travel | 120mm | 
| Wheel Size | 27.5", 29" | 
| Steerer Tube | Tapered | 
| Spring | Air | 
| Adjustments | Rebound, compression, air pressure | 
Install remote reservoir mounting brackets to the vehicle frame, marking and drilling for placement.
Mount the FOX shock to the lower mount and install the reservoir to its bracket.
Verify suspension clearance, settle suspension by driving, and check wheel alignment.
Remove rear wheels and OE shocks, ensuring axle support to prevent damage.
Install new FOX shocks using OE hardware and orient reservoirs correctly.
Learn how to adjust DSC High Speed and Low Speed compression settings.
Loading...