Ride your bike and verify the settings before repeating the procedure.
Caution! Never ride your bike with more than 200 PSI, or less than 125 PSI in the reservoir air
chamber. Doing so can damage your shock and require repairs that are NOT covered under
warranty.
ProPedal + Boost Valve Interaction
Certain aspects of the Boost Valve can influence the ProPedal adjustment.
If the ProPedal adjustment knob is fully counterclockwise (lightest ProPedal damping position) and the
compression damping is still too strong, attach a shock pump to the Schrader valve on the reservoir and reduce
the pressure 10 – 15 PSI. Repeat to achieve the desired compression damping.
If there is not enough compression damping with the ProPedal knob fully clockwise, add 10 – 15 PSI to the
Boost Valve until desired compression damping is achieved.
To Previous Page
Loading...
