45
You can use this handle to lift and lower the saw
blade. Turn it clockwise to lower the saw blade
and anti-clockwise to lift it (Fig. 20).
You can use this ferrule to angle the saw blade (Fig. 21).
Loosen the lock knob and then turn it clockwise to angle
the saw blade to the left. Turn it anti-clockwise to bring
back the saw blade at 90°; after defining the position
block the knob again.
By using this device you can lock saw blade angle (Fig.
22).
To loosen the knob, turn it anti-clockwise. Use this knob
for all angle and adjustment operations. On the
contrary, before any cutting work, be sure that it is
perfectly blocked.
The blade must be blocked in the desired position before using the goniometer. Be always
sure that the saw blade is perfectly blocked before using the machine.
Height adjustment handle
Angle
adjustment
To Next Page
Loading...
