Need help?Do you have a question about the Fox Mini Micron and is the answer not in the manual?
General| Brand | Fox |
|---|---|
| Model | Mini Micron |
| Category | Fishing Equipment |
| Language | English |
Turn off the unit and unscrew the battery cover screws using a cross-head screwdriver.
Carefully remove old batteries, insert new ones ensuring correct polarity.
Ensure good weatherproofing by correctly seating and pivoting the battery cover into place.
Do not overtighten battery compartment screws to avoid damaging threads.
Volume can be cycled incrementally by pressing the volume button and then releasing.
Tone can be cycled incrementally by pressing the tone button and then releasing.
Sensitivity can be cycled incrementally by pressing the sensitivity button and then releasing.
LED intensity is toggled by holding volume and pressing tone button to change intensity.
LEDs flash red every 2 seconds when batteries are low; no audible warning is given.
Allows power connection for Fox Illuminated Bite Indicators, activating them for 20 seconds.
Requires 2 x N/ LR1 1.5V Alkaline batteries. Use good quality batteries for maximum life.
Do not mix battery types/ages, use rechargeables, or place in hot environments.
Dry the unit indoors with the hard case removed after use in heavy rain.
Avoid triggering LED/speaker near eyes/ears, keep away from children, avoid dropping.
Declaration of conformity for EMC Regulations 2016 and Ingress Protection Rating IPX5.
To Next Page
