EasyManuals Logo

Fox Receiver User Manual

Fox Receiver
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
The operating range of the Mini Micron X receiver, like all low power radio
systems, is highly dependant on the conditions of use and can be adversely
aected by the position of both transmitter and receiver, the terrain over
which it is being used, the prevailing atmospheric conditions and the presence
of any interfering signals. To obtain best performance, it is recommended that
you:
• Keep the Mini Micron X receiver as high above ground as possible. If worn
on the body it should be worn as high as possible and on the outside of your
clothing.
Try to keep a direct “line-of-sight” between the receiver and transmitter,
obstructions such as trees, buildings, etc may cause loss of signal, or
reections of the signal, resulting in dead spots”.
• Do not keep the Mini Micron X receiver in the same pocket as a mobile
phone, or other electronic device.
• Ensure both your receiver and your alarms have good batteries.
All the above hints become progressively less important, as the working
range is reduced. Remember to use the system responsibly
– the Mini Micron X receiver has been designed to give a long operating range
in order to maximise reliability at close range and NOT to encourage users to
leave their rods in the water unattended. Please sh responsibly!
DO NOT trigger LED or speaker in close proximity to human or animal
eyes and ears.
• Store this equipment out of reach of children and infants.
• Avoid dropping or subjecting the Micron to severe impacts.
• Use only recommended batteries and accessories.
Register your Fox product online at www.foxint.com. You will be given a
Customer Reference Number and a Warranty Reference Number, please
make a note of these numbers.
You can view warranty details online using the Customer Reference
number. FOX, I-Com and Micron are Registered Trade Marks.
We reserve the right to alter or modify the contents of this manual.
Hereby, Fox International Group Ltd, declares that this Micron is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU. The EU Declaration of Conformity
can be found at :
www.foxint.com/regulation_documents.html
Patents: EP1668983
ERP (Eective radiated power) = -18.217 dBm max
Operating frequency = 868.870 MHz
Designed and Developed in UK.
The Mini Micon Receiver requires 2 x LR03 AAA 1.5V Alkaline batteries.
The use of good quality batteries is essential for maximum battery life.
To reduce the risk of battery leakage:
• DO NOT mix old and new batteries
• DO NOT mix dierent battery types
The use of rechargeable batteries is NOT recommended
Please ensure the batteries are removed from the Micron during long
periods without use.
CZECH
3. Opatrně vyjměte baterie.
Vložte nové baterie, a ujistěte
se, že mají správnou polaritu.
2. Posuňte kryt baterie směrem dolů
od příposlechu, dokud nebude možné
vyjmout celý kryt.
1. Při vkládání nových baterií mějte
přístroj vypnutý.
4. Zarovnejte kryt baterií společně
s kolejnicemi a posuňte jej k horní
části příposlechu, dokud neucítíte,
že kryt těsně dolehne.
ANTÉNA
INDIKACE
SVĚTLA V
BIVAKU
TLAČÍTKO PRO ZAPNUTÍ
/ VYPNUTÍ / NASTAVENÍ
HLASITOSTI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fox Receiver and is the answer not in the manual?

Fox Receiver Specifications

General IconGeneral
BrandFox
ModelReceiver
CategoryFishing Equipment
LanguageEnglish

Related product manuals