Need help?Do you have a question about the FoxAlien Reizer and is the answer not in the manual?
Steps for securely attaching the laser module to the machine.
Guide for installing necessary drivers for machine communication.
Adjust engraving speed, S values, and size for optimal results.
Control laser power and set the machine's zero point for engraving.
Initiate engraving and save your GCODE file.
General| Working Area | 400 x 400 x 45mm (15.75” x 15.75” x 1.77”) |
|---|---|
| Input Voltage | 12V |
| Input Current | 5A (Max) |
| Laser Power | S0-S1000 |
| Motor | NEMA17 |
| Limit Switch | X, Y |
| Firmware Version | 1.1f |
| Support OS | Windows XP, Windows 7, Windows 8, Windows 10, Linux, Mac OS |
| Software | LaserGRBL, Lightburn, and other GRBL compatible software |
| Support Add-ons | Offline controller, Rotary roller, Honeycomb table (NOT included) |
| Offline Working | Supports offline working, offline control sold separately |
To Next Page