Foxconn D250S - Serial Port; Device Settings; Change Settings; Device Mode

26
3
► Serial Port
This item is used to enable or disable the serial port (COM).
► Device Settings
This item shows the resource assigned to the serial port.
► Change Settings
This item is used to select an optimal settings for the serial port.
► Device Mode
This item is used to change the serial port mode.
CIR Controller Conguration
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
CIR Controller Configuration
CIR Conroller [Enabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Enable or �isable CIR Control-
ler
Advanced
► CIR Controller
This item is used to enable or disable the onboard CIR controller.