Foxconn H61MXL Series - Install the CPU and CPU Cooler

2
8
2-1 Install the CPU and CPU Cooler
Install the CPU
Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
Read the following guidelines before you begin to install the CPU :
■ MakesurethatthemotherboardsupportstheCPU.
■ Alwaysturnoffthecomputerandunplugthepowercordfromthepowersupplybefore
installing the CPU to prevent hardware damage.
■LocatethepinoneoftheCPU.TheCPUcannotbeinsertediforientedincorrectly.
(Or you may locate the notches on both sides of the CPU and alignment keys on the
CPU socket.)
■ ApplyanevenandthinlayerofthermalgreaseonthesurfaceoftheCPU.
■ DonotturnonthecomputeriftheCPUcoolerisnotinstalled,otherwiseoverheating
and damage of the CPU may occur.
■ SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnot
 recommendedthatthesystembusfrequencybesetbeyondhardwarespecications
since it does not meet the standard requirements for the peripherals. If you wish to
 setthefrequencybeyondthestandardspecications,pleasedosoaccordingtoyour
 hardwarespecicationsincludingtheCPU,graphicscard,memory,harddrive,etc.
Hyper-Threading Technology System Requirements:
(Go to Intel's website for more information about the Hyper-Threading Technology)
■ AnIntel
®
CPU that supports HT Technology
■ AchipsetthatsupportsHTTechnology
■ AnoperatingsystemthatisoptimizedforHTTechnology
■ ABIOSthatsupportsHTTechnologyandhasitenabled
C
A
U
T
I
O
N
!
LGA1155CPUSocket
AlignmentKey
Pin-1 corner of
the CPU Socket
LGA1155CPU
Notch
Pin-1 triangle
marking of CPU