Foxconn H61MXL Series - Performance Tuning

3
26
Performance Tuning
► CPU Configuration/North Bridge Configuration
Press <Enter> to go to relative submenu.
CPU Configuration
► EIST
You can enable or disable the EIST (Processor Power Management, PPM) through this item.
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
F-Center
▶ CPU Configuration
▶ North Bridge Configuration
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CPU Configuration
F-Center
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
F-Center
EIST [Enabled]
Intel Turbo Mode [Enabled]
Non Turbo Ratio Override 29
Host Clock Override(1/100 MHZ) 10000
CPU Voltage (1/256) 0
IA Core Current Max(1/8 Amp) 780
iGFX Core Current Max(1/8 Amp) 260
Power Limit 1 Value (1/8 Watt) 760
Power Limit 2 Switch [Enabled]
Power Limit 2 Value (1/8 Watt) 950
Runtime Core Ratio Limit 32
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enhanced Intel SpeedStep
Technology
F-Center