CE mark.
The inverter complies with the requirements of the applicable
CE guidelines.
Beware of hot surface.
The inverter can become hot during operation. Avoid contact
during operation.
Danger of high voltages.
Danger to life due to high voltages in the inverter!
Danger.
Risk of electric shock!
Danger to life due to high voltage.
There is residual voltage in the inverter which needs 5 min to
discharge.
•
Wait 5 min before you open the upper lid or the DC lid.
Product should not be disposed as household waste
2.4
CE Directives
This chapter follows the requirements of the European low voltage directives,
which contains the safety instructions and conditions of acceptability for the
system, which you must follow when installing, operating and servicing the unit.
If ignored, physical injury or death may follow, or damage may occur to the unit.
Read these instructions before you work on the unit. If you are unable to
understand the dangers, warnings, cautions or instructions, please contact
an authorized service dealer before installing, operating and servicing the unit.
The Grid connected inverter meets the requirement stipulated in Low Voltage
Directive (LVD) 2014/35/EU and Electromagnetic Compatibility (EMC) Directive
2014/30/EU. The unit is based on: EN 62109-1:2010; EN 62109-2:2011;
IEC62109-1(ed.1); IEC62109-2(ed.1) EN 61000-6-3:2007+A:2011; EN
61000-6-1:2007; EN 61000-6-2:2005
To Next Page
Loading...
