FoxESS F6000 - LCD Operation

35
6.3 LCD Operation
6.3.1Factory state
a. Long press on the button to enter the language setting.
b. Short press on the button to choose the language.
c. Long press on the button to finish language setting and enter to safety
setting.
d. Short press on the button to choose the safety.
e. Long press on the button to finish safety setting and leave factory state.
6.3.2User setting
Short press on the button until ‘settting’ is displayed on the LCD, then long
press on the button to enter the setting option, use short press to choose the
option and use long press to finish or enter the setting.
6.3.3LCD information
Operating State
Information Display
Description
Working Condition
Power off
No display
DC input voltage<80V
Initialization & Waiting
Waiting
80V< DC Input voltage≤120V
is standby mode
Checking
Checking
Input voltage >120V is grid
checking mode
Normal state
Normal state
Inverter is working in
grid-tied mode
Flash
Flash
Upgrading software
Checking Parameters
Real-time power
Pac=xxxxW
Real-time output power
Calculate energy
Information
Etotal=xxxxkwh
Total energy feedback to grid