10
Note: There are some instances where the red charging light will slowly blink before turning
solid red. This is perfectly normal.
• Never attach an unapproved or a non-FOXPRO® charger to your XWave!
Damages caused by plugging unapproved charging devices into your XWave will
not be covered by warranty.
• Never connect your XWave to an unregulated 12V system (i.e. automotive
systems, high current power supplies, etc.) Serious damage will occur which is not
covered by the warranty. The charge jack is intended only for FOXPRO® chargers.
• Do not mix battery types! For example: never use NiMH rechargeable batteries in
conjunction with non-rechargeable alkaline batteries.
• Never attempt to charge batteries that are not intended to be recharged! This
includes both Zinc Carbon and alkaline cells. The resulting damage can be serious
and will not be covered by the warranty. For maximum charge efficiency, we
recommend charging your XWave in temperatures ranging from 40°F to 85°F (5°C
to 30°C).
• Disconnect any/all accessory devices that may be attached to the XWave prior to
charging. This includes external speakers, auxiliary devices, and USB cables.
• Make sure that the rechargeable battery pack is installed in the XWave properly.
• Connect the approved FOXPRO charger to the charger jack on the XWave and
attach the transformer to the appropriate outlet.
• Remember that NiMH batteries self-discharge about 1% per day.
• Do not leave charging batteries unattended.
• Remove batteries from battery holder when caller will not be used for prolonged
periods to help prevent deep discharge.
• Recharge your batteries periodically—even when not in use—to prevent deep
discharge.
To Next Page
Loading...
