24
NT530 Multi-System Scanner Manual_English_V1.02
Figure 5-25 Sample Active Tests Selection Screen
● Before running any tests, always observe the safety instructions provided in this manual and the
warnings provided by the vehicle manufacturer. In addition, follow any warnings and descriptions
provided on the scanner screens.
● Never run the tests while the vehicle is moving.
5.2.6 Special Functions
Special Functions perform various component adaptations of the control module under test, allowing
you to recalibrate or configure certain components after making repairs or replacement. Typical
service operation screens are a series of menu driven executive commands. Follow on-screen
instructions to complete the operation.
To perform special tests on a vehicle:
1. Scroll with the arrow keys to highlight the special function test you want to perform fromthe menu
and press the ENTER key.
Figure 5-26 Sample Function Menu Screen
2. Select an available service from the menu and press the ENTER key to continue.
To Next Page
Loading...
