26
NT530 Multi-System Scanner Manual_English_V1.02
Not all function options listed above are applicable to all vehicles. Available options may vary by the
year, model, and make of the test vehicle. A “Not supported the mode!” message displays if the option
is not applicable to the vehicle under test.
7 System Setup
This section illustrates how to program the scanner to meet your specific needs.
When Settings is selected, a menu with available service options displays. Menu options typically
include:
●
Language
● Unit
●
Shortcuts
●
Display Test
● Keypad Test
●
About
7.1 Select Language
Selecting Language opens a screen that allows you to choose system language. The scan tool is set
to display English menus by default.
To configure system language:
1. Scroll with the arrow keys to highlight Language from Settings menu and press ENTER key.
Figure 7-1 Sample Settings Screen
2. Press left and right arrow key select a language and press the ENTER key to confirm. Press the
Back key to exit and return.
Figure 7-2 Sample Language Selection Screen
To Next Page
Loading...
