Foxwell NT530 - Change Units; Configure Shortcut Keys

27
NT530 Multi-System Scanner Manual_English_V1.02
7.2 Change Units
Selecting Unit opens a dialog box that allows you to choose units of measure.
To change the unit setup:
1. Scroll with the arrow keys to highlight Units from Settings menu and press the ENTER key.
Figure 7-3 Sample Settings Screen
2. Press the up and down arrow key select an item and press the ENTER key to save and return.
Figure 7-4 Sample Unit Selection Screen
7.3 Configure Shortcut Keys
Selecting Shortcuts option lets you to change the functionality of the shortcut buttons.
To assign a function to a shortcut button:
1. Scroll with the arrow keys to highlight Shortcuts from Settings menu and press the ENTER key. A
screen with available shortcut keys displays.