Foxwell NT630 Pro - Read Codes

20
NT630 Pro ABS & Airbag Reset Tool Manual_English_V1.01
Not all function options listed above are applicable to all vehicles. Available options may vary by
the year, model, and make of the test vehicle. A “The selected mode is not supported!” message
displays if the option is not applicable to the vehicle under test.
4.3.1 Read Codes
Read Codes menu lets you read trouble codes found in the control unit. Typical menu options
include:
●
Present/Permanent/Current Codes
●
History Codes
Present/Permanent/Current codes stored in a control module are used to help identify the cause
of a trouble or troubles with a vehicle. These codes have occurred a specific number of times and
indicate a problem that requires repair.
History codes are also referred to as past codes that indicate intermittent DTCs that are not
currently active.
To read codes from a vehicle:
1. Scroll with the arrow keys to highlight Read Codes from Function Menu and press the ENTER
key. A code list including code number and its description displays.
Figure 4-20 Sample Function menu screen
2. Use the up and down arrow keys to scroll through data to select lines, and left and right arrow
keys to scroll back and forth through different screens of data.
Figure 4-21 Sample Code Screen
3. Press function key Save to store DTC information. Or use the BACK key to exit.