SECTION 1 - GENERAL INFORMATION
5
CURSOR SERIES
Print P4D32C006 E Base - 03/2015
PRODUCT TECHNICAL CODE
The technical code is assigned during production; it is used to identify the main characteristics, characterise the application and
the corresponding level of power output. It is stamped on one side of the crankcase near the oil filter.
F
ENGINE FAMILY IDENTIFICATION
PROJECT EVOLUTION
ENGINE
CYLINDER CONFIGURATION
NUMBER OF CYLINDERS
MAIN ENGINE SPECIFICATIONS
APPLICATION
TYPE-APPROVAL FOR PERFORMANCE
TYPE-APPROVAL FOR STANDARDS
VARIANTS OF THE
BASIC ENGINE
3 H F A 6 1 5 A
*
D 0 0 1
F 3 H F A 6 1 5 B
*
D 0 0 1
To Next Page
Loading...
