25
5 FOOTSWITCH FUNCTIONS
BANK: TOGGLE
“Toggle” functions allow you to switch back and forth between two designated entries.
Primary Bank and Secondary Bank – These set the desired Banks by their numbers.
Preset Load – Species which preset (if any) should be loaded when the specied bank is selected:
None: No preset from the new bank will be loaded until you select one yourself.
First: The rst preset in the new bank will be loaded automatically.
Current: Whichever “Preset Within Bank” switch is active will remain active.
For example, if you have “P2” selected within the old bank, P2 from the new
bank will be loaded automatically when you select the new bank.
€
The LED ring is bright when you toggle to the “Primary” bank, dim for the “Secondary”, and off for “neither”.
“Inc / Dec” functions allow you to scroll through a series, stepping up or down.
Increment/Decrement – Designates the step size, up or down. For example, to create a switch
that goes to the next bank, select +1. For a switch that goes to the previous bank, select -1.
Wrap – Determines whether the banks wrap around when you get to the either end of the list.
Lower Limit, Upper Limit – These set the lowest and highest bank that can be accessed
using this switch, allowing you to restrict access to only certain banks/presets. If you’re
using UP and DOWN switches, you’ll probably want to set the same limits for both.
Preset Load – Species which preset (if any) should be loaded when the specied bank is selected:
None: No preset from the new bank will be loaded until you select one yourself.
First: The rst preset in the new bank will be loaded automatically.
Current: Whichever “Preset Within Bank” switch is active will remain active.
For example, if you have “P2” selected within the old bank, P2 from the new
bank will be loaded automatically when you select the new bank.
€
The LED ring is bright when the switch is active, otherwise dim.
MINI-DISPLAY OPTIONS FOR BANK FUNCTIONS
The following Mini-Display Label options are selectively offered for the various Bank Functions.
Number – Shows the number of the Bank.
Custom – Shows any text you enter in the Custom Label eld.
Both – For the toggle function, shows both numbers, with brackets around the one that is currently selected
Ex: [B000] B001 or B000[B001] or without brackets if neither is loaded: B000/B001
Destination – Shows the bank number that will load when the switch is activated.
Action – Shows the action of the switch and the step size. Ex: Bank +1
To Next Page
Loading...
