Fractal FC-12 - Scene Functions; Scene: Select; Scene: Increment;Decrement

28
5 FOOTSWITCH FUNCTIONS
SCENE: SELECT
Creates a footswitch that is “hard-wired” to a specic Scene.
For example, a switch that selects Scene 1, or Scene 7.
Scene – Designates the desired Scene by its number.
€
The LED ring is bright when the designated Scene is loaded, otherwise dim.
SCENE: TOGGLE
“Toggle” functions allow you to switch back and forth between two designated entries.
Primary Scene and Secondary Scene — These set the desired Scenes by their numbers.
€
The LED ring is bright when you toggle to the “Primary” Scene, dim for the “Secondary” and off for “neither”.

“Inc / Dec” functions allow you to scroll through a list, stepping up or down.
Increment/Decrement – Designates the step size, up or down. For example, to create a switch
that goes to the next Scene, select +1. For a switch that goes to the previous Scene, select -1.
Wrap – For the Inc/Dec function, determines whether the list wraps from Scene 8 to Scene 1, and vice versa.
Lower Limit, Upper Limit – These set the lowest and highest Scene that can be accessed
using an Inc/Dec Scene switch, allowing you to restrict access to only certain Scenes. If you’re
using both UP and DOWN switches, you’ll probably want to set the same limits for both.
€
The LED ring is bright when the switch is active, otherwise dim.

MINI-DISPLAY OPTIONS FOR SCENE FUNCTIONS
The following Mini-Display Label options are selectively offered for the various Scene Functions.
Name – Shows the Name (rst 10 characters) of the target Scene.
Number – Shows the Number of the target Scene.
Custom – Shows any text you enter in the Custom Label eld.
Both # – For the toggle function, shows both Scene numbers, with brackets around the one that is
currently selected. Ex: Scene[1]2 or Scene 1[2] or without brackets if neither is loaded: Scene 1/2
Destination Name – For Toggle and Inc/Dec functions, shows the name (rst ten
characters) of the Scene that will load when the switch is activated.
Destination Number – For Toggle and Inc/Dec functions, shows the number
of the Scene that will load when the switch is activated.
Action – For the Increment/Decrement function, shows the action of the switch and the step size. Ex: Scene +1
SCENE FUNCTIONS
Default Color: Red