Frama Matrix F32/F42/F62
24
You can also set the Detail-guided start menu to be the permanent default start menu in the Setup
1 menu (see page 53).
4.3.4. Tariff-guided
Call up the Tariff-guided start menu by pressing the Weight field in the
OneTouch menu. You will also be taken to this menu when batch weighing is
complete.
Then press the Tariff-guided key.
You will be guided through the individual tariff properties one-by-one. The
postage will be calculated once the last item for the tariff has been entered.
You can begin franking once the Ready prompt appears.
You can also set the Tariff-guided start menu to be the permanent default start menu in the Setup 1
menu (see page 53).
4.3.5. Numeric keypad
Postage rates can be entered independently of the mail products using the
integrated numeric keypad.
The numeric keypad is included in the Tariff-guided start menu. Press the
franking value.
Enter the postage value required using the keypad. Confirm the value by
pressing OK. Assign the amount to a category. You can begin franking once
the Ready prompt appears.
The numeric keypad cannot be defined as the start menu.
4.3.6. Postage scales (optional)
There are a number of ways of determining the precise weight of the mail item using S2, S5 or S30
scales.
4.3.6.1. Checking the weight of a mail item when franking
Caution The weight of a mail item can only be checked if you have set the
scales mode to STACK (default setting) in the Setup 3 menu.
Information about the weight is displayed continuously in the top section of
the franking mask (in this case 17g). In view of this, you can have the weight of
a mail item conveniently displayed to you without having to interrupt the
franking process.
The weight display has no effect on the postage rate calculation.
To Next Page
Loading...
