Frama Matrix F32 - Last Report; Print Report

Frama Matrix F32/F42/F62
60
9.4.1 Network Setup
The instructions for configuring the network connection are supplied separately and are not the
subject of this operating manual. In the as-delivered condition, dynamic configuration by DHCP is
preset; this provides an automatic connection of your Frama franking system in most cases.
FramaOnline2's address is: fo2.frama.com. Communicate using https via port 443.
Information
Current information and instructions for configuring the network connection on your Frama
franking system may be found under Downloads at www.frama.com.
You will also find here a listing of the error messages associated with the network connection
and FramaOnline2.
9.5. Last Report
Pressing this key displays the last report transmitted from the FramaOnline2 data centre. Touch the
display to return.
9.6. Print Report
Pressing this key prints out the last report transmitted from the FramaOnline2 data centre (see Info
Print FramaOnline2). Insert an envelope or similar in the franking system to print out the report.