Frama Matrix F32/F42/F62
37
4.6.6. Remedying transport fault in AF/AFS automatic feeder
The transporting area of the automatic feeder can be opened to clear the transport quickly in the
event of a fault (paper jams, pieces of paper left lying, etc.).
Caution Always switch off the franking system before you open the transport area cover. There
is a risk of injury on rotating parts.
How to open the transport area cover:
Slide the lock to the left to the open padlock symbol.
Grip under the transport cover with one hand and pull it upwards
until it latches. Remove the jammed envelopes or pieces of paper.
Press the transport cover down with both hands (so that you do not
tilt it) until the latch locks and the lock switch returns to its right-hand
position.
To Next Page
Loading...
