Frama Matrix F32 - Page 53

Frama Matrix F32/F42/F62
53
7.1.4. Status List
This key displays a status list. These data and the data in the system information provide important
input for our customer service.
7.1.5. Start Up/Log Off
Use this key to restart the system after you have adjusted settings. Pressing Start Up/Log Off takes
you straight to cost centre selection.
7.1.6. Save Start Menu
Here you can save a Start Menu as the default. The Start menu saved will automatically be preset
after every restart or after a change of cost centre.
7.1.7. Change PINs
This is used for setting up cost centres in Admin mode or for changing PIN and name of the current
cost centre. Please read page 19 et seq. for more detailed information.
7.1.8. Reset Counters
Please read page 19 et seq. for more detailed information.