20
Immediate start with set cooking time
By programming the cooking time only (points 1 and 2 of the Delayed start with set cooking time section),
cooking will start up immediately.
To cancel a scheduled cooking process
Press the button.
Minute minder function
The minute minder allows you to set a given amount of time from which the countdown begins. This feature
does not turn the oven on or off; it merely sounds when the time has elapsed.
When the button has been pressed, the display will read as follows:
Then set the desired time using the and buttons
After the button has been released, the countdown begins and the current time is displayed.
When the time is up, a buzzer sounds, which can be turned off by pressing any of the buttons (except the
and buttons) at this point the symbol will also come off.
Modifying and cancelling data
The data entered can be changed at any time by pressing the corresponding button and the or
buttons.
When the data for the cooking time is cancelled, the data for the end cooking time is also cancelled
automatically, and vice versa.
If the oven has been programmed, it will not accept end cooking times which come before the start of the
cooking process.
N.B. Straight after it is turned off, and for a prolonged period of time, the interior of the oven maintains a
temperature close to that set for cooking; so, to avoid overcooking or burning food, we recommend you
remove it from the oven as soon as cooking is complete.
Electronic oven temperature control
This feature allows you to program the oven or the grill as follows:
delayed start for a specific length of time;
immediate start for a specific length of time;
minute minder.
Button Functions:
: minute minder with hours and minutes
: cooking time
: end cooking time
: switch to manual mode
: set cooking time - backward;
: set cooking time - forward.
How to set the digital clock
After the appliance has been connected to the power supply, or when the power has gone out, the clock
display will automatically reset to 0:00 and begin to blink. 0.00
Press the button and then set the correct time (within four seconds) using the and buttons.
Button sets the time forward.
Button sets the time backward.
Whenever the time needs to be reset, follow this same procedure:
Manual operation of the oven
Once the correct time has been set, the programmer automatically switches to manual mode.
Note: To reset the manual mode after each "Automatic" cooking, press the and buttons.
To Next Page
Loading...
Need help?
General