21
Manual operation of the oven
When a cooking mode is selected, the oven immediately starts the heating process, shown by the symbol
of a hot pan on the display. For each cooking mode, the display suggests a recommended cooking
temperature (SEE: Suggested cooking table); this temperature may be changed by the user using the
knob: turn it anti-clockwise to decrease the temperature and clockwise to increase it.
The symbol of a hot pan flashing on the display indicates that the oven is in the pre-heating stage, which
means it has not reached the desired temperature yet. When the oven reaches the desired temperature, a
"beep" will sound for two seconds and the symbol of the hot pan will stay on permanently, to indicate the
cooking stage has begun.
Immediate start with set cooking time
Let us suppose you want to cook at 200°C for 30 minutes.
1. Turn the selector knob, the display will suggest the recommended cooking temperature; use the tempe-
rature control knob to change it if necessary.
2. Press the hot pan key and then press the and keys to set the desired cooking time, in this case
30 minutes.
Release the key, the hot pan signal will start flashing after 4 seconds to indicate the oven is pre-heating. The
countdown, however, will only start once the desired temperature has been reached (except when the grill
modes are on, in which case the countdown starts immediately, see B).
The information displayed is as follows:
A - pre-heating stage
(you can check the time set using the hot pan key and the temperature set using the and keys).
When the oven reaches the desired temperature, a "beep" will sound for two seconds and the symbol of
the hot pan will stay on permanently, to indicate the cooking stage has begun.
B - cooking stage
/
(remaining cooking time / temperature set - alternating)
C - end of cooking
You will be informed that cooking has ended by an intermittent beeping (**) lasting one minute, which can
be silenced by pressing the key (or even the hot pan and stop keys), and the display will indicate.
The oven suspends heating automatically, the fans will stay on to avoid any heat accumulation and the oven
light will stay on so you can check cooking. However, the temperature inside the oven will remain high for
several minutes. Should you wish to continue cooking manually, press the button to re-start the heating
process. The word AUTO will disappear and the hot pan symbol will reappear. If on the other hand you
wish to stop altogether, set the selector knob back to 0. The display will indicate the following for 3 seconds.
After which the display will go back to indicating the time of day (if you want to turn off the display when the
oven is off, press the timer and hot pan keys simultaneously and the display will indicate:
then use the and keys to set this parameter to:
the display will be turned off and will only come back on when the oven is on).
(**): the intensity of the beeping can be modified while it is emitted and for future beeping by pressing the key.
To Next Page
Loading...
Need help?
General