BBR Operating Manual Page 14
General Product Loading Tips:
§ DO NOT load warm product directly into the BBR Case. Pre-chill
product in walk-in before transferring to the display case.
§ DO NOT over-fill the BBR Case. All refrigeration requires good air
circulation to maintain uniform
temperatures.
§ DO NOT let plastic bags, packaging or
containers block or obstruct the
Evaporator air intake openings at the
top of the case interior.
6 Store-Closing
Procedures
The Bottled Beverage Refrigerator is designed for extended storage of
beverage containers. Any unsold beverages can remain in the refrigerator
overnight, as long as the refrigerator is left ON and the doors are kept
closed.
1 Outside Unit Cleaning
Wipe off and clean the BBR exterior,
using approved McDonald!s cleaning
chemicals, according to instructions. Be
sure to clean the unit: front/doors, both
sides and sloped compressor access
panels on top of the unit. Glass cleaner
(only) should be used to clean doors.
2 In-Case Spills & Leaking Containers
If a beverage container leaks:
§ Remove and dispose of leaking
container.
§ As time allows, remove all other product from that shelf component.
Wipe clean any bottles and cans soiled.
NOTE: Turning OFF the power switch turns off the refrigeration system,
as well as the case light. Keep the switch ON to keep the case cold!
To Next Page