– 7 –
FMW 45 CR C XS / FMW 45 CR C BK
EN
Maintenance and cleaning
The oven uses a special enamel which is easy
to keep clean. However, Franke recommends
to clean it frequently in order to avoid baking
on grime and previous cooking residues.
If the appliance is not cleaned regularly, its
surface could become damaged, permanently
affecting the appliance’s lifespan and possibly
causing a safety hazard.
Risk of electric shock due to
entering liquid!
The device contains electrical components.
Make sure that no liquid enters the interior
of the device.
Do not use a wet cloth to clean the
operating elements.
Repair
Do not allow anyone except qualified
personnel to install or repair the appliance.
Contact a service centre authorized by the
manufacturer or qualified personnel in the
following cases:
– Immediately after unpacking, in the event
of doubts regarding the integrity of the
device
– During installation (according to the
manufacturer‘s instructions)
– Doubts regarding the correct operation of
the device
– Malfunction or poor operation
– Replacing the power socket if incompatible
with the power plug of the device
– Damage to the power cable or need of
replacing the power cord or plug
Taking out of service
If the oven is no longer to be used, call the
service centre or qualified personnel to
disconnect it from the power supply.
To Next Page
Loading...
Need help?
General
