Franke Designer Series User Manual

SPECIFICATIONS
Recommended use
Domestic
Material
Black Glass
Functions
10
Colour availability
Black
Dimensions
894 x 478.5 x 521mm
Weight
60kg gross, 53kg net
Source
Electrical
Cavity size
105L
Max current
230V-15A 240V-15A
Temperature range
50/250
Timer
Digital timer
Convection fan
Yes
Cooling fan
Yes
Display
LED
Child lock
Yes
Door glazing
Triple
Bottom element
Concealed
Shelf rack
2
Baking pan (enamelled)
1
Telescopic runner
1
Power cord without plug
Hard wired
Power cord length
1400mm
Controller (knobs)
Touch control
DESIGNER 10 FUNCTION OVEN 90CM
Dimensions are nominal measurements only.
Disclaimer: Products in this specication manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor
reserves the right to vary specications or delete models from their range without prior notication. Dimensions are nominal measurements only.
Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.
Tech Page Version 1
Clean the surface of the unit with a damp cloth, soft brush or ne sponge and then wipe dry.
In case of heavy soiling, use hot water with non- abrasive cleaning product. For cleaning the glass of the oven door,do
not use abrasive cleaners or sharp metal scrapers, these can scratch the surface or lead to the glass being damaged.
Never leave acidic substances (lemon juice, vinegar) on stainless steel parts. Do not use a high pressure cleaner for
cleaning the unit. The baking pans may be washed in mild detergent.
CLEANING RECOMMENDATIONS
*T&C’s apply
DESIGNER SERIES
2

Franke Designer Series Specifications

General

Brand	Franke
Model	Designer Series
Category	Oven
Language	English