· Gently close the door until left and right hinge levers A are hooked to part B of the door (Dig.4);
Reassemble the
door by following the above procedures backwards.
Fig.1
Fig.2
Fig.3
Fig
.4
To dismantle the oven door (two methods)
Method 1 remove and assemble procedure:
· R
emove the seal A(Fig.2)、B、C(Fig.3) by push the no.2 rods of left and right sides(fig.1)
· Gently
pull out the inner and middle panes of glass(fig.
4)
·
C
lean the glass and other components with an appropriate cleaner. Dry thoroughly, and place on a soft surface.
Reassemble the door by following the above procedures backwards.
Fig.1: Fig.2:
Fig.3:
F
ig.4:
Method 2 remove and assemble procedure:
·
Flip the glass p
ane retainers outwards to open them(Fig.1)
· Gently lift up th
e inner pane and remove it(fig.2)
· Gently lift up th
e middle pane and remove it(fig.3
)
·
C
lean the glass and other components with an appropriate cleaner. Dry thoroughly, and place on a soft surface.
Reassemble the door by following the above procedures backwards.
B C
A
B