Franke FRI604B1 User Manual

Chapter 1 Ready, set up, go
6
COOKING ADVICES
PAN QUALITY
Adapted materials: steel, enamelled steel, cast iron, ferromagnetic stainless-steel, aluminium with
ferromagnetic bottom.
Not adapted materials: aluminium and stainless-steel without ferromagnetic bottom, cupper, brass,
glass, ceramic, porcelain.
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles:
• Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water must
heat in a few seconds.
• A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise doesn’t
mean any failure on the appliance and doesn’t influence the cooking operating.
PAN DIMENSIONS
The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the corresponding
cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking zone.

Franke FRI604B1 Specifications

General

Brand	Franke
Model	FRI604B1
Category	Cooktop
Language	English