To Next PageTo Next Page
Need help?Do you have a question about the Franklin Electric FACGF Series and is the answer not in the manual?
General| Motor Housing Material | Cast Iron |
|---|---|
| Impeller Material | Cast Iron |
| Pump Material | Cast Iron |
| Motor Type | Submersible |
| Horsepower | 2 HP |
| Phase | Single |
| Voltage | 230 V |
| Application | Residential, Commercial wastewater applications |
| Type | Submersible Grinder Pump |
Read and follow all safety rules and operating instructions before operating or installing this pump.
Do not operate the pump dry. Wear ear protection to reduce noise. Review chemical safety.
Ensure connections are tight, do not breathe fumes, never use with flammable fluids.
Pumps are suitable for use where vertical distance from pump to water level does not exceed 25 feet.
Flow rates in GPM at various total heads for different HP pumps at sea level with 5' static suction lift.
Locate pump on a firm level surface, bolt down, use continuous rising suction hose, and install a foot valve.
Check oil level, fill pump casing and suction line with water before starting. Do not run dry.
Regularly check oil, disassemble for cleaning, inspect ceramic seat, reassemble with proper lubrication.
Addresses problems like pump not pumping, not priming, slow priming, poor performance, and losing prime.
Warrants products against defects in material or workmanship for 12 months from installation or 24 months from manufacture.
Details conditions that void the warranty, including misuse, improper installation, and external damage.
