Franklin Electric Turf Boss FTB3CI User Manual

OWNER'S MANUAL
English
EN
Turf Boss 3-5 HP
The Turf Boss is designed for applications moving
high volumes of water, such as timer-operated
irrigation systems, commercial dewatering, resi-
dential water transfer, rainwater drainage, light
agricultural irrigation, sump drainage, and indus-
trial liquid transfer. A premium self-priming
sprinkler pump, the Turf Boss is approved for
indoor or outdoor operation through CSA and UL.
This product is covered by a limited warranty for a period of 1 year from the date of original purchase by the
consumer. For complete warranty information, refer to www.FranklinWater.com
.
Specifications
Pumps
Pump Ends
Model HP
Suction x
Discharge (in)
Motor
Enclosure
Phase Volts
FTB3CI
3 2 x 2
ODP
1 230
FTB3CI-T 3 230/460
FTB3CI-E
TEFC
1 230
FTB3CI-TE
3
230/460
FTB3CI-T5E 575
FTB5CI
5 2½ x 2
ODP
1 230
FTB5CI-T 3 230/460
FTB5CI-E
TEFC
1 230
FTB5CI-TE
3
230/460
FTB5CI-T5E 575
Model HP
Suction x
Discharge (in)
NEMA Motor Frame Size Fitment
FTB3CI-PE 3 2 x 2
143-184JM 4.5 AK .875" Shaft
FTB5CI-PE 5 2½ x 2

Franklin Electric Turf Boss FTB3CI Specifications

General

Brand	Franklin Electric
Model	Turf Boss FTB3CI
Category	Water Pump
Language	English

Summary

Specifications

Pumps

Technical specifications for various pump models including HP, discharge, enclosure, phase, and volts.

Pump Ends

Specifications related to the pump ends, including HP, discharge, and NEMA frame size.

Safety Instructions

DANGER

Critical hazards including explosion, fire, and electric shock.

WARNING

High risks of severe injury or death from electrical shock.

CAUTION

Risks of bodily injury, electric shock, or equipment damage.

Installation

Typical Installation

Illustrated guide to standard pump installation setup.

Pump Location

Recommendations for optimal placement of the pump.

Piping Instructions

Guidance on connecting suction and discharge piping.

Suction Line

Instructions for setting up the suction side of the pump.

Discharge Line

Instructions for setting up the discharge side of the pump.

Electrical Connections

Guidance on wiring the pump unit correctly and safely.

Operation

Prime the pump

Steps to fill the pump with water for initial operation.

Check pump rotation

Verifying correct impeller rotation for 3-phase motors.

Start the pump

Procedures for safely starting the pump after priming.

Maintenance

Draining the Pump

Procedure for draining water to prevent freezing damage.

Disassembly

Steps for taking the pump apart for servicing or repair.

Pump Shaft Disassembly

Detailed steps for disassembling the pump shaft components.

Pump Check Valve Disassembly

Steps to take apart the check valve.

Pump Check Valve Reassembly

Steps to reassemble the check valve correctly.

Pump Shaft Assembly

Detailed steps for reassembling the pump shaft.

Troubleshooting