Franklin NCS-101 - Using a Password for Privacy; Setting and Managing Passwords

Using a Password
You can use a password to keep the information
in your phone list private. Your password will be
requested whenever anyone turns on the unit
and first presses
PHONE
.
Warning! After you have set the password, it will
be required whenever you try to access the
phone list for the first time during a session. So
always record your password and keep it in a
separate location.
1. Press
PHONE
.
2. Use
to see Set the password and then
press
ENTER
.
3. Type a password and then press
ENTER
.
Remember to write down your exact password
and keep it in a separate location.
4. To test the password, press
ON/OFF
twice,
type the password, and then press
ENTER
.
5. To disable the password, repeat Steps 1
and 2 above, and then press
ENTER
when
Enter password appears.
✓ About Automatic Shutoff
If you forget to turn off this product, it will au-
tomatically turn off in about two minutes.
10