Fraser EX715 - Maintenance; Calibration

11
GB
EX715 Iss.4
7. Maintenance
8. Calibraon
The charge plate in the top of the meter should be kept clean. It is important to keep this
area free from dust and u, and must not be touched in operaon, as this will aect the
reading.
Apart from replacing the baery, there are no user serviceable parts inside the EX715. If
there is a malfuncon it should be returned to the manufacturer. The guarantee is void if
the instrument is taken apart.
The EX715 is calibrated as standard using a 150mm x 150mm or other sized plate. If the
instrument is used in hazardous areas then we recommend an annual recalibraon.
If you need further informaon about stac electricity problems, please contact the
manufacturers or authorised distributors.