Fraser EX715 - Introduction; Explanation of Symbols

4
© Fraser An-Stac Techniques Ltd 2015
The EX715 Static Meter has been designed for the analysis of industrial static
electricity problems. It has been certified for use in some hazardous areas.
It is important that the instrument is used correctly. Please read the following
operang instrucons before use. Also please read the notes on the electric eld
overleaf which give useful guidelines when measuring stac electricity.
The EX715 Stac Meter is an invaluable tool in invesgang industrial stac
electricity problems. It is used throughout producon and quality control. It
helps the operator to analyse the problem sciencally. e.g.
• Find out how much stac is present?
• Establish standards of acceptability for stac levels in processes.
• Reject material if it is too stac generave.
• To see where and how the stac is being generated.
• To see if stac eliminators are eecve and if they are in the best posion.
1. Introduction
It is essential that you read and understand the complete manual before installing
and using this equipment. This is important for safety and for warranty cover.
1.1 Explanation of Symbols
Warning!
This symbol appearing in the operang instrucons refers to operaons which,
if carried out improperly, may result in serious personal injuries.
Cauon!
This symbol appearing in the operang instrucons refers to operaons which,
if carried out improperly, may result in damage to property.