Freddy Superminor - 4.4 Fit the tools

FPQ41 Superminor Issue 1 13
4.4 Fit the tools
The Superminor is supplied with the following
tools and tool accessories:
Tool
Use
Probe tool
Dark grey rigid PVC
tool used to clear
sumps.
Crevice tool
Pale grey rigid PVC
tool used to clean
slideways on machine
beds or narrow gaps.
Flexible bench
tool
An orange, soft
polyurethane tool
used to clean the
inside of machines.
Floor tool
Used for floor cleaning
and spillages.
Extension tube
Metal tube usually
used with the floor
tool, but can also be
used to extend the
reach of the flexible
bench and crevice
tools
51 to 38 mm
adaptor
Metal adaptor used to
fit the crevice tool,
flexible bench tool and
extension tube to the
suction hose.
The tools are pushed into the free end of the
suction hose.
To remove the tools, just pull them out of the
end of the suction hose.
Figure 4-9: Fitting tools