To Next PageTo Next Page
Need help?Do you have a question about the Freecom FSG-3 and is the answer not in the manual?
General| Compatibility | Mac |
|---|---|
| Network Interface | Ethernet |
| USB Ports | USB 2.0 |
| Supported Protocols | UPnP, HTTP |
| Security Features | Firewall |
| Power Supply | External power adapter |
Details the connectors, LEDs, and buttons on the front of the FSG-3 unit.
Illustrates various network connection scenarios for the FSG-3.
Explains the meaning of different LED states for power, SATA, WAN, and WLAN.
Outlines network requirements and TCP/IP setup for connecting computers.
Step-by-step guide for setting up TCP/IP and network components in Windows.
Instructions for configuring TCP/IP for Mac OS 8.6/9.x and Mac OS X.
Details how to connect the FSG-3 to the internet via an ISP.
Steps for physically connecting the FSG-3 power and network cables.
Guide for installing software from the included CD, including the FSG Assistant.
Instructions on how to launch the FSG Assistant software from the CD.
Overview of tasks the assistant can perform, including configuration and recovery.
Methods to access the FSG-3 web-based configuration interface.
Key initial settings like password, date/time, users, and folders.
Configuring WAN connection for router or modem, including fixed IP.
Discusses multiple connection types and enabling services like FTP, SMB.
Accessing system, version, device, network, and log file information.
Managing configuration, date/time, hard drive, firmware, and system health.
Setting up DHCP server, Dynamic DNS, HTTP, FTP, and SSH servers.
Managing user accounts, groups, folders, and administrator settings.
Configuring LAN, WAN, WAN Options, and VPN connections.
Procedures for safely shutting down, rebooting, and logging out of the FSG-3.
Mapping network drives using the Freecom Storage Gateway Assistant.
Step-by-step guide to manually map network drives in Windows.
Instructions for connecting to the FSG-3 using SMB in Mac OS X.
Information on recognized USB devices and file systems.
Steps for connecting and using USB mass storage devices.
Guide for installing and configuring a USB printer with the FSG-3.
Procedure for connecting and using external S-ATA storage devices.
Checks for basic operation, power, and LED status.
Solutions for issues accessing or using the web configuration interface.
Troubleshooting ISP, PPPoE, browsing, TCP/IP, and ping problems.
Guides for resetting defaults and resolving date/time discrepancies.
Certification statement regarding radio interference conformity.
FCC rules compliance statement and interference mitigation advice.
Voluntary Control Council for Interference statement for residential areas.
Explains IP addresses, classes, netmasks, and subnetting concepts.
Details Dynamic Host Configuration Protocol (DHCP) and Network Address Translation (NAT).
Covers MAC addresses, ARP, Ethernet cabling types, and cable quality.
