GB
4
25
Note: After recovery, all user data is still available on the FSG-3.
To avoid problems, the administrator should backup all user data
and format the hard disk. If an old configuration file was saved
before, the administrator should load this configuration and
afterwards copy the individual user data back to its folders.
4.2.6 Search again for available Freecom Storage Gateway devices
Click here to search again for your FSG-3 if it was not detected. Make sure you
have setup your network as described in the "Before you begin" chapter and
make sure all the cables are properly attached.
Freecom Storage Gateway Assistant
To Next Page
Loading...