Freeway Raiser User Manual Page 10 of 24 Part No. 999017 / Rev.4 / Dec 2017
6.3 Standing a user who requires assistance with the Freeway safety belt
The Freeway Safety Belt should be fitted
to the user prior to assisting with the
stand. Refer to the sling user guide.
Place the belt around the user’s waist,
ensuring the elasticated section is placed
on the user’s lumbar spine and the solid
section is place under the user’s coccyx.
Fasten in place using the Velcro straps
and adjustable buckle fastening support
belt (ensure support belt is at maximum
length)
The user can now be stood following the process in the “operating
instructions “
Once the user is stood, the buckle
fastening support belt can be passed
through the opening in the centre
vertical handle and adjusted to
provide optimum support during the
transfer
7. Compatible Belt Types
To Next Page
Loading...
Need help?
General