FREEWAY Raiser - Assembly Instructions; Assembly Safety Notes

Freeway Raiser User Manual Page 7 of 24 Part No. 999017 / Rev.4 / Dec 2017
5. Assembly instructions
Place the handle in the brackets as shown in (fig 1.) Below.
SAFETY NOTE: Some of the parts may be heavy and will need to
be lifted with care. Heavier items may need two people to lift.
(Please refer to technical specifications on page 13)
With the handle and
brackets aligned, press
home until fully inserted –
see the next step in (fig 2.)
below
(fig 1.)
Lock the handle to the base
assembly using two M8 hand
nuts and scalloped nylon
washers as shown in (fig 2.)
opposite
(fig 2.)
Caution – care required to not
trap fingers when applying the
two parts together