Brake Chamber Stroke Specifications
Chamber
Max Applied Stroke: inch (mm)
Manufacturer Type
*
Size
†
Dana Spicer Long Stroke
16L
2 (51)20L
24L
24LS
2-1/2 (64)
30LS
*
Long stroke design is indicated by a tag, or embossing, on the brake chamber.
†
Specifications are relative to a brake application with 80 to 90 psi (550 to 620 kPa) air pressure in the brake chambers.
‡
If type 36 chamber is used, slack length should be less than 6 inches.
Table 1, Brake Chamber Stroke Specifications
Brakes42
Century Class Trucks Maintenance Manual, April 200542/10
To Next Page
Loading...
