Moving the spring-loaded parking
brake cylindertothe driving position
!
Tighten the release screw with amaximum
of 26 lb-ft (35 Nm). Do not use an impact
wrench. You couldotherwise damage the
spring-loaded brake cylinder.
Reset all spring-loaded parking brake cylinders
to the drive position.
X
Charge the brake circuituntil the cut-off
pressure is reached.
X
Swing the parking brake leverasfar as it
willgotothe released position.
X
Turn release screw ; of spring-loaded
parking brake cylinder : clockwise to driv-
ing position 3.
X
Tighten release screw ;.
Jump-starting, tow-starting and towing away
191
Breakdown assistance
Z
To Next Page
Loading...
