See Fig. 1 for lubrication points (not on FL112).
No. MOP No. Component Remarks
*
1 32–02 Front Suspension Spring Pins
and Shackle Pins
†
Lube both sides of vehicle; one grease fitting for each spring pin;
two grease fittings for each shackle.
2 46–02 Drag Link Two grease fittings; one on each end.
3 46–03, 46–04,
46–05
Power Steering Check fluid level in reservoir (46–03); change fluid and filter (46–
04), when required. Lubricate steering gear (46–05).
4 46–01, 46–06 Steering Driveline Lubricate grease fittings at slip-joint splines and both universal
joints. Lubricate miter gear (if applicable).
5 42–11, 42–13,
42–24, 42–26
Slack Adjusters, Front Axle Lubricate both sides of axle; one grease fitting for each slack
adjuster.
6 42–10 Camshaft Brackets, Front Axle Lubricate both sides of axle; one grease fitting for each camshaft
bracket.
7 33–05, 33–06 Oil-Lubricated All-Wheel-Drive
Front Axle
Check oil level; add oil if low (33–05). Change oil (33–06) when
required.
2
3
4
4
4
5
6
7
8
9
10
10
11
12
13
14
12
13
12
15
16
18
21
20
19
3
1
1
12
22
23
17
f000271
09/15/97
Fig. 1, Lubrication Points (all models but FL112)
General Information 00
Lubrication Tables: 00–18
Business Class Trucks Maintenance Manual, February 2004 00/27