No. MOP No. Components Remarks
*
1 32–02 Front Suspension Spring Pins
and Shackle Pins
†
Lube both sides of vehicle; one grease fitting for each spring pin;
two grease fittings for each shackle.
2 46–02 Drag Link Two grease fittings; one on each end.
3 46–03, 46–04,
46–05
Power Steering Check fluid level in reservoir (46–03); change fluid and filter (46–
04), when required. Lubricate steering gear (46–05).
4 46–01, 46–06 Steering Driveline Lubricate grease fittings at slip-joint splines and both universal
joints. Lubricate miter gear (if applicable).
5 42–11, 42–13,
42–24, 42–26
Slack Adjusters, Front Axle Lubricate both sides of axle; one grease fitting for each slack
adjuster.
6 42–10 Camshaft Brackets, Front Axle Lubricate both sides of axle; one grease fitting for each camshaft
bracket.
7 33–05, 33–06 Oil-Lubricated All-Wheel-Drive
Front Axle
†
Check oil level; add oil if low (33–05). Change oil (33–06) when
required.
8 33–03 Tie Rod Two grease fittings; one on each end of tie rod.
f000862
1
2
3
4
4
5
6
9
8
7
10
10
11
12
13
15
14
12
18
19
12
12
12
17
16
19
20
21
22
23
1
16
16
09/15/97
+
+
4
Fig. 2, Lubrication Points (FL112 models only)
General Information 00
Lubrication Tables: 00–18
Business Class Trucks Maintenance Manual, February 2004 00/29
To Next Page
Loading...
