08
Do not take apart the appliance by yourself if the cause of failure is not found,
you had better contact certified serving center.
TROUBLE SHOOTING
Cause CorrectionsSymptom
Water leaks from the bottom
of coffee maker.
Please clean the drip tray.
Get rid of them.
There is much water in the drip tray.
Please contact with the authorized
service facility for repairing.
Use high and narrow cup.
Use whole milk or half-skimmed milk.
Reset knob to off position.
Reset knob to off position.
Turn knob to “ ” positon, perform
cooling operation.
Reset knob to “OFF” position.
Clean coffee maker per the content
in “before the first use” for several times.
Plug the power cord into a wall outlet
correctly, if the appliance still does
not work, please contact with the
authorized service facility for repairing.
Only after the white indicator is
illuminated, the steam can be used to froth.
Please use fresh coffee powder, or
store unused coffee powder in a cool,
dry place. After opening a package of
coffee powder, reseal it tightly and store
it in a refrigerator to maintain its freshness.
The coffee maker is malfunction.
There is some coffee powder on
filter edge.
No clean correctly after cleaning
mineral deposits.
The power outlet is not plugged well.
The white indicator is not illuminated.
The container is too big or the shape
is not fit.
You have used skimmed milk.
Make steam for 180s and the knob
is not reset.
Bolier temp is too high.
The knob is not reset to off position,
but the machine turned on.
Make hot water for 215ml and the
knob is not reset.
The knob is not reset after cooling
down.
The coffee powder is stored in a
hot, wet place for a long time. The
coffee powder turns bad.
Water leaks out of outer side
of filter.
Steam indicator blinking quickly
Acid (vinegar) taste exists in
Espresso coffee.
The coffee maker cannot
work any more.
The steam cannot froth.
Single-cup indicator and
double-cup indicator blinking
quickly
Single-cup indicator or double
-cup indicator blinking quickly
Single-cup indicator 、 double
-cup indicator and steam
indicator blinking quickly
Need to descaling
ALL indecator blinking at the
same time for 5 times
Decalcifying