FRESKO CM001 - Know Your Coffee Maker; Before the First Use

To Next Page

To Previous Page

(Product may be subject to change without prior notice)

BEFORE THE FIRST USE

Remove the plug at the bottom of the tank. Pour water into water tank, the water

level should not exceed the “MAX” mark in the water tank. Then close the tank cover.

Set brewing filter into metal funnel (no coffee in brewing filter).

Place an espresso cup on drip plate. Make sure the knob is at the horizontal

position(off-porition).

To ensure the first cup of coffee tastes excellent, you should rinse the coffee

maker with warm water as follows:

KNOW YOUR COFFEE MAKER

1. Power indicator / button

2. Single-cup indicator / button

3. Double-cup indicator / button

4. Steam indicator / button

5. Brewing filter

6. Metal funnel

7. Funnel handle

8. Drip plate

9. Drip tray

10. Tank cover

11. Handle

12. Water tank

13. Knob

14. Steam handle

15. Steam wand

16. Measuring spoon

Note: the appliance is supplied with a water tank for easy cleaning, you

fcan ill the water tank with water firstly, and then put the water tank into

the appliance.

Note: the appliance is not equipped with jug, please use your jug or coffee

cup.

Connect to power source, press the power button“ ”. The power indicator will

be illuminated and single/double-cup/steam indicator will flashing.

The appliance will start heating,When single/double-cup/steam indicator

becomes solid, it shows the pre-heating is finished. Press double-cup button, wait

for a moment, The water will flow out.

When the appliance stops pumping water automatically, you can pour the

water in container out then clean them thoroughly, now you can start brewing.