EasyManua.ls Logo

FRESKO CM001 - Page 6

FRESKO CM001
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
04
PRE-HEATING
MAKE ESPRESSO COFFEE
Remove the funnel by turning it in clockwise, Add ground coffee to brewing filter
with measuring spoon, a spoon ground coffee power can make about a cup of
top-grade coffee, then press the ground coffee powder tightly with the measuring
spoon.
Set brewing filter into metal funnel, make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance as indicating of
“LOCK”mark, and you can fix them into coffee maker firmly through turning it
anticlockwise until it is at the “CLOSE” position .
Then place the hot cup on drip plate.
Select single cup“ ” or double-cup “ ” according to your demand and then
press the corresponding button of the selected function. After waiting for a
moment, there will be coffee flowing out.
The appliance will stop working when the coffee-brewing is finished, and then
your coffee is ready now.
After finishing making the coffee, you can take the metal funnel out through turn
clockwise, then pour the coffee residue out.
Remove the water tank and open the tank cover to fill it with desired water, the
water level should not exceed the “MAX” mark in the water tank. Then place the
water tank into the appliance properly.
Set brewing filter into metal funnel, make sure the tube on the funnel aligns with
groove in the appliance, then insert the funnel into the appliance from the “LOCK”
position, and you can fix them into coffee maker firmly through turn it anticlock-
wise until it is at theCLOSE” position.
Place an espresso cup on drip plate.
Then connect the appliance to power supply source. Make sure the knob is at the
horizontal position(off-porition).
Press the power button ”, The power indicator will be illuminated and
single/double-cup/steam indicator will flashing.
When single/double-cup/steam indicator becomes solid, it shows the pre-heating is finished.
To make a cup of good hot Espresso coffee, we recommend you preheating the
appliance before making coffee, including the metal funnel, brewing filter and
cup, so that the coffee flavour can not be influenced by the cold parts.
Note:
There may be noise when pumping the water on the first time, it is
normal, the appliance is releasing the air in the appliance. After about
20s, the noise will disappear.
WARNING:
Do not leave the coffee maker unattended during making the coffee, as
you need operate manually sometimes!